A 28BYJ-48 turns in 2038 countable steps, not 2048 — here is the wiring, the connector-gender fix and a sketch that proves it.
Author Archives: Amir Hakim
If your SIM800L reboots the moment it searches for a network, the supply is the culprit. It needs 3.4–4.4V and 2A bursts — here is how to power it properly with an 18650 or an LM2596 buck.
A classic school robotics build: 2WD chassis, Arduino Uno, L298N and two IR sensors following a black tape line. Complete wiring table, full code, and the sensor-tuning ritual that makes or breaks the robot — ideal for RBT and FYP projects.
A fan that spins then stops on the IRF520 module means the MOSFET is only half on at Arduino’s 5 V. Honest limits, correct wiring, the flyback diode check, and when to switch to a relay.
NO, COM and NC explained, the high/low trigger jumper decoded, and honest advice on 240V mains — wire a relay module to your Arduino or ESP32 the safe way, starting on low-voltage DC.






