Monocrystalline Cells Solar Panel 5V 6V 3W 6W 10W 15W Mono Solar Energy

✅ Ready Stock in KL(Sungai Besi)
🔥 Ship within 24 hours from KL on working hours | Monday to Saturday, ( 10:00 AM to 6:00 PM ), Closed on Sunday
🚚 Same Day Delivery Available For Klang Valley Customers.
☎️ Message us via Shopee Chat or Whatsapp +6011 – 6822 6855 to arrange same day delivery or for product enquiry

 
 
A monocrystalline solar panel for small electronics, robotics builds and classroom demonstrations. One listing, four options — pick one at checkout and you receive that one panel.
Option — SKU — Rated power — Nominal voltage
3W 6V (base) — 03W06VS — 3 W — 6 V
6W 5V — 06W05VS — 6 W — 5 V
10W 5V — 10W05VS — 10 W — 5 V
15W 5V — 15W05VS — 15 W — 5 V
The 3W option is the 6V unit. The 6W, 10W and 15W options are all 5V. Match the option to your device’s input before you choose.
 
 
⭐ Specification
3W 6V option (03W06VS) — this is the unit in our photo
– Panel size: 116 mm x 169 mm.
– Cells: monocrystalline, laid out as four vertical strips behind a smooth front face.
– Frame: white moulded frame around the laminate.
– The front face and the frame edges are solid. There are no mounting holes through them.
– Output: a white cable ending in a USB Type-C plug. It ships long and coiled, tied off for packing.
– Mounting hardware in the box: a white swivel bracket — round base with screw holes, a swivel joint locked by a metal thumbscrew, and a knurled white thumbwheel on the head — plus a bag of screws.
6W 5V (06W05VS), 10W 5V (10W05VS), 15W 5V (15W05VS)
– Rated power and nominal voltage as per the table above.
– Monocrystalline cells.
 
 
🔌 Connector & What Ships
3W 6V option (03W06VS): the output is a MALE USB Type-C plug on the end of the cable.
– It is a plug (male), not a socket. Whatever you connect it to must have a female USB-C port to receive it.
– That cable carries no alligator clips and no bare or tinned wire leads. The plug is factory-terminated — there is nothing at that end for you to solder.
 
 
⚒️ Interesting Project
1. Solar-Powered Robot: Power sensors and motors to create an autonomous robot that charges in the sun.
2. Portable USB Charger: Build a solar phone charger to keep your devices topped up on the go.
3. Remote Weather Station: Combine with sensors to monitor conditions in your garden or outdoor space.
4. Educational Solar Demo: Use to teach students the basics of photovoltaics and renewable energy.
 
 
📦 Package Includes:
3W 6V option (03W06VS)
– 1 x 3W 6V solar panel, 116 x 169 mm, white frame
– 1 x white output cable terminating in a male USB Type-C plug
– 1 x white swivel mount bracket — round screw-down base, thumbscrew-locked swivel joint, knurled thumbwheel
– 1 x bag of screws for the bracket
6W 5V option (06W05VS)
– 1 x 6W 5V solar panel
10W 5V option (10W05VS)
– 1 x 10W 5V solar panel
15W 5V option (15W05VS)
– 1 x 15W 5V solar panel
Not included with any option: no battery, no power bank, no charge controller or MPPT module, no USB-C female breakout board, no USB-C extension cable, no printed manual.
 
 
🧰 What You Also Need
– A female USB-C input to take the 3W 6V option’s plug — a USB-C socket on your device, adapter or module.
– A USB-C female breakout board if you want the 3W 6V option wired into a breadboard, an Arduino, an ESP32 or a robot chassis. A USB-C plug will not go into breadboard holes, and no breakout board is supplied here.
– Your own storage if the load has to keep running after dark or under heavy cloud. There is no battery in this package — a panel only produces while light falls on it.
– Screwdriver for the bracket. The bracket base takes screws through the holes around its rim, and the screws come bagged with it.
 
 
❓ FAQ
Q: The photo shows 116 x 169 mm and “3W 6V” — is that what I get if I pick the 10W?
No. That photo and those dimensions are the 3W 6V option. Each option’s power and voltage rating is in the table above. Select the option you actually want at checkout.
Q: Why is the 3W option 6V when the other three are 5V?
That is how the four options are rated: 3W at 6V, then 6W, 10W and 15W at 5V. Check your device’s input voltage against the option you pick.
Q: Can I connect the 3W 6V option straight to a breadboard or an Arduino header?
Not directly. Its output is a USB-C plug, so you need a USB-C female breakout board to reach the pins. That breakout board is not part of this listing.
Q: How does the bracket fix to a wall?
The bracket has a round base with screw holes around the rim, a swivel joint that locks with a metal thumbscrew, and a knurled thumbwheel on the head for angling the panel. Screws come in the bag packed with it.
Q: Does it come with alligator clips or bare wire leads?
No. On the 3W 6V option the output is the white USB-C cable described above, and no clips or loose leads are packed with it.
 
 

🏬 | Our Shop Lot |
No 12 (Ground Floor – 3D Printer & Parts) & (First Floor – Robotic Parts & Tools)
Jalan Tasik Utama 7,
Medan Niaga Tasik Damai,
Sungai Besi, 57000 Kuala Lumpur