Soldering Iron Tip Cleaner with Container Steel Ball Tip Cleaning

✅ Ready Stock in KL(Sungai Besi)
🔥 Ship within 24 hours from KL on working hours | Monday to Saturday, ( 10:00 AM to 6:00 PM ), Closed on Sunday
🚚 Same Day Delivery Available For Klang Valley Customers.
☎️ Message us via Shopee Chat or Whatsapp +6011 – 6822 6855 to arrange same day delivery or for product enquiry

 
 
A soldering iron tip cleaner: a ball of curled cleaning wire held in a round metal tin with its own lid. It cleans dry — you push the hot tip of your soldering iron into the wire and pull it back out, and the wire wipes oxidation and residue off the tip. No sponge, no water.
 
 
⭐ Specification
– How it works — dry. Push the hot tip in, pull it out. Nothing to wet, nothing to squeeze, no sponge to keep damp.
– Cleaning wire — crimped, curled wire wound into a ball. Zoom into our product photo and the spiral coil texture is clear. It is coiled wire, not solid spheres and not ball bearings.
– Wire colour — in our product photo the wire is copper-coloured, rose-gold toned. Not grey.
– Container — a round, shallow metal tin in a plain silver finish, with a separate lid that comes off and goes back on.
– Lid window — the lid has a clear transparent window set into the middle. In our product photo the copper-toned wire is visible right through that window.
– What we ship — 1x wire ball per tin. In our product photo the ball sits in the tin base and fills it out to the wall.
– Listed pack size — 5.0 × 5.0 × 2.0 cm (W × L × H).
– Listed weight — 0.05 kg (50 g). That is the packed item including the tin, not the wire on its own.
– Electrical spec — none. This is a passive hand tool: no power input, no battery, no voltage or current rating, no operating range, no signal interface.
– Options — none. This SKU ships in one configuration only. There are no variants to choose between, so every line on this page describes the same item.
 
 
🔌 Connector & What Ships
Not applicable to this product.
This item has no electrical interface at all. Our product photo shows no pin headers of either gender, no sockets, no screw terminals, no solder pads, no flying leads, no wires and no PCB. There is nothing to solder, nothing to plug in, no polarity to get right and no pinout to look up. The only “connection” here is mechanical — your own hot iron tip going into the wire.
We ship this as three parts: a metal tin, a lid and a wire ball.
 
 
⚒️ Interesting Project
1. DIY Guitar Pedal: Craft your own unique guitar effects pedal, learning about audio circuits and soldering techniques along the way.
2. Arduino Robot: Build a programmable robot using an Arduino board, motors, and sensors, while honing your soldering skills.
3. LED Cube: Create a mesmerizing 3D LED cube display, mastering matrix wiring and soldering connections.
4. Retro Gaming Console: Assemble your own retro gaming console using a Raspberry Pi and custom controller, practicing precise soldering for optimal performance.
 
 
📦 Package Includes:
– 1x round metal tin (base)
– 1x lid with clear centre window
– 1x ball of curled cleaning wire
That is the pack. Specifically not included: soldering iron, soldering tips, iron stand or holder, sponge, water tray or any wetting vessel, solder, flux, tweezers, printed manual or instruction card.
 
 
🧰 What You Also Need
– A soldering iron. This is a cleaner for a tip you already own. No iron ships with it.
– A bit of bench space beside your iron. Listed pack size is 5.0 × 5.0 × 2.0 cm (W × L × H).
 
 
❓ FAQ
Is this loose metal balls or ball bearings that I pour in?
No. It is crimped, curled wire wound into a ball — like a coiled wire scourer. We ship 1x ball per tin, not a scoop of loose spheres. Zoom into our photo and you can see the coils.
What does the wire look like up close?
Copper-coloured, rose-gold toned crimped wire, wound in a spiral coil and packed into the tin out to the wall.
Do I need to wet it, or add a sponge?
No. It ships dry and it is used dry. There is no sponge and no water tray in the pack, and there is nothing in the tin that is meant to be soaked.
Can I close the lid while my iron is still hot, or rest the hot iron on the lid?
Please do not. Work with the lid off and set to one side, and put the lid back on only after the tin and the wire have cooled. Do not rest a hot iron on the lid or on its clear window.
Is a soldering iron or a stand included?
No. You get the tin, the lid and the wire ball, and nothing else. If you need an iron or a stand, buy those separately.
It arrived and I am still not getting the tip clean.
Contact us and we will work through it with you.
 
 

🏬 | Our Shop Lot |
No 12 (Ground Floor – 3D Printer & Parts) & (First Floor – Robotic Parts & Tools)
Jalan Tasik Utama 7,
Medan Niaga Tasik Damai,
Sungai Besi, 57000 Kuala Lumpur