Anti-Static Precision Tweezer for Electronics PCB Repair Soldering Component ESD12 ESD14 ESD15

✅ Ready Stock in KL(Sungai Besi)
🔥 Ship within 24 hours from KL on working hours | Monday to Saturday, ( 10:00 AM to 6:00 PM ), Closed on Sunday
🚚 Same Day Delivery Available For Klang Valley Customers.
☎️ Message us via Shopee Chat or Whatsapp +6011 – 6822 6855 to arrange same day delivery or for product enquiry

 
 
A tweezer from the ESD series, sold one piece per order. This listing covers the ESD-14 shown in our photo, and carries ESD-12 and ESD-15 from the same series alongside it — use the option list at checkout to see which are selectable today. Every one of them is a tweezer: a hand tool with no battery, no wiring and no electronics, nothing to power and nothing to configure.
The option shown in our photo is the ESD-14.
 
 
⭐ Specification
Price: RM 2.90 per piece. The option you pick does not change the price.
Electrical: none, on every option. No voltage rating, no current draw, no battery, no wiring and no data interface. These are hand tools.
ESD-14 — the option in our photo. This block describes that option:
– One-piece body: a single strip of metal bent into a closed rounded loop at the rear, forming the two sprung arms. No screws, no rivets, no hinge, no pins, no separate handle parts.
– Matte, fine-textured black coating over the rear loop and both arms.
– The coating stops short of the working ends. The last short section of each arm is bare, bright, polished metal.
– On the unit we photographed, the coating-to-bare-metal boundary is a ragged, uneven edge rather than a clean masked line.
– Each arm is flat and tapers progressively from the middle towards the tip, with a slightly widened flat pad and a visible shoulder about mid-arm where your thumb and finger sit.
– Both tips are straight, in line with the arm axis. No curve, no bend, no angle.
– Both tips are narrow, flat-profiled, and finish in a blunt, square-cut end of near-constant width. Neither tip tapers to a needle point. If you are buying for fine-pitch SMD pick-and-place, read the FAQ below first.
ESD-12 and ESD-15 are separate models in the same ESD tweezer series. The block above describes the ESD-14, which is the one in our photo.
 
 
🔌 Connector & What Ships
Not applicable. Every option on this listing is a tweezer, so there is no electrical connector on any of them and no male or female to quote.
On the ESD-14 in our photo we checked the rear loop, both arms and both tip ends: no pin header, no socket, no screw terminal, no JST / XH / Dupont lead, no solder pad, no PCB, no wire and no cable anywhere on the tool.
Nothing needs soldering and nothing needs assembling. It is a hand tool and it works as it comes.
 
 
⚒️ Interesting Project
1. DIY Arduino Shield Assembly – Perfect for placing small components
2. Raspberry Pi HAT Construction – Essential for precise SMD handling
3. Custom Mechanical Keyboard Build – Great for switch and LED placement
4. Smart Watch Repair Projects – Ideal for handling tiny components
 
 
📦 Package Includes:
– 1x tweezer, in the single option you select.
That is the complete list, and it is the same whichever option you select. This is not a 3-piece set — one order is one tweezer, in one option.
The offer is the tool by itself: no case, no pouch, no sleeve, no tip protectors or caps, no cleaning cloth, no manual and no spare tips.
 
 
🧰 What You Also Need
– Nothing to make it work. No power supply, no adapters, no drivers, no jumpers. It is a hand tool.
– A second order if you want a second option. One order is one piece, in one option.
 
 
❓ FAQ
Q: At this price, do I get the whole series — ESD-12, ESD-14 and ESD-15 together?
A: No. You get one tweezer, in the one option you select. This listing is not a set.
Q: Is it a fine-point tweezer for 0402 parts and fine-pitch SMD?
A: For the ESD-14, no. Our photo shows narrow but blunt, flat, square-cut tips with no taper to a point. It is not a needle-point SMD tweezer.
Q: Does it need batteries, soldering or any setup?
A: No. It is a mechanical hand tool. Take it out and use it.
Q: Something is wrong with the one I received.
A: Message us on this listing’s chat and we will work it out with you.
 
 

🏬 | Our Shop Lot |
No 12 (Ground Floor – 3D Printer & Parts) & (First Floor – Robotic Parts & Tools)
Jalan Tasik Utama 7,
Medan Niaga Tasik Damai,
Sungai Besi, 57000 Kuala Lumpur